Location of holes for accelerator pedal 1970 Vitesse Mk2 Saloon

[hillclimber888]

I am rebuilding a 1970 Triumph Vitesse Mk2 Saloon for hill climbing and sprinting.  Body shell and chassis were sent away to be completely rebuilt.  Drivers floor pan was replaced, so I have lost any reference point as to where two accelerator mounting holes go. Do you have, have access to, or know where I might be able to find a photo that shows where the mounting holes are in relation to the channels or even some dimensions.  The internet doesn't have a clear photo.  My photo shows my current best guess - but it could be  +/- 1/2" in any direction!

Any help or suggestions gratefully received

[68vitesse]

When I did my Mk1 Vitesse I fitted the accelerator as far to the right as possible to get maximum clearence from the brake pedal.

Regards

Paul

[Paul H]

I’ll take some photos today for you 

Paul

[Paul H]

Hope this helps 

 

Paul

 

[Colin Lindsay]

Hopefully you got the e-mail I sent last night showing the holes from underneath; going by the two you've marked in red, the lower one ie closest to the camera in your photo is where I would put the first / furthest away screw, so the next hole would be closer to the camera.

I'll repost the photo I sent just in case.

 

[hillclimber888]

Thanks for the photos.  I feel a lot more confident about my positioning now.  I assume that pattern replacement floor pans have ridges in very similar places to the orginals.

Alistair

[hillclimber888]

Thanks for help.  Now bolted in place.  

Alistair