AlanT Posted August 21, 2021 Report Share Posted August 21, 2021 Hi All, wiring spaghetti stage of my rebuild! Anyone know what colour wire should be on the sunken spade on the heater fan please? Thanks Alan Link to comment Share on other sites More sharing options...
Colin Lindsay Posted August 21, 2021 Report Share Posted August 21, 2021 I'd guess green from memory... in fact are there two green wires sharing a single black push-fit connector that goes in there? The other side is plain black, so if green isn't that side then it's the other... Link to comment Share on other sites More sharing options...
PeteH Posted August 21, 2021 Report Share Posted August 21, 2021 On the Herald wiring diag; it`s shown as (W). which is White?. Item 30. Link to comment Share on other sites More sharing options...
NonMember Posted August 21, 2021 Report Share Posted August 21, 2021 1 hour ago, PeteH said: On the Herald wiring diag; it`s shown as (W). which is White?. Item 30. Not quite. The white wire (ignition switched supply, unfused) only goes as far as the switch, 29. The wire from there to the motor isn't annotated on that diagram but it won't be white. Link to comment Share on other sites More sharing options...
Colin Lindsay Posted August 21, 2021 Report Share Posted August 21, 2021 That's not a Herald heater; looks like Spitfire / GT6? That's why I guessed green, was working on my own a while back. Link to comment Share on other sites More sharing options...
AlanT Posted August 21, 2021 Author Report Share Posted August 21, 2021 Yes, it’s a 1980 Spitfire. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now