Colin Lindsay Posted January 8, 2022 Report Share Posted January 8, 2022 Anyone got any unwanted dashboards for both 1200 and 13/60? I'm looking for anything from good / ready to fit down to 'solid wood but needs refurbished'. I always like to work on a spare and leave the original in place until they can be swapped over, but won't say no to a good ready-to-fit replacement. Preferably with no additional holes, just simple original style. All help appreciated! Colin Link to comment Share on other sites More sharing options...
A TR7 16V Posted January 9, 2022 Report Share Posted January 9, 2022 I've got a 13/60 one with no extra holes in it. But it's been re-varnished by a PO, and they may have gone through the veneer here and there. Also the glovebox lid don't match. So it may be a start if you're up for re-veneering one. It's no use to me so just postage or free collect from St Annes, (too) near Blackpool. Graham Link to comment Share on other sites More sharing options...
Chris A Posted January 9, 2022 Report Share Posted January 9, 2022 1 hour ago, A TR7 16V said: It's no use to me so just postage or free collect from St Annes, (too) near Blackpool. Graham On no! Not the postage to Northern Ireland saga again . .😱 1 Link to comment Share on other sites More sharing options...
Badwolf Posted January 10, 2022 Report Share Posted January 10, 2022 ChrisA - Don't worry about this one, St Anne's to NI is probably one of the shortest 'straight line routes', so the carriage should be at it's lowest. Maybe Colin could start training up some carrier vultures to air lift spares from the mainland. There are always 'Pete's Parrots' for the smaller parts. Link to comment Share on other sites More sharing options...
Chris A Posted January 10, 2022 Report Share Posted January 10, 2022 18 minutes ago, Badwolf said: Maybe Colin could start training up some carrier vultures Drones? I bet Colin has enough spare Triumph engines to build fleet of them . . Link to comment Share on other sites More sharing options...
Badwolf Posted January 10, 2022 Report Share Posted January 10, 2022 1 minute ago, Chris A said: Drones? I bet Colin has enough spare Triumph engines to build fleet of them . . Now that's a great idea. We could start a design thread for drones using Triumph parts. Pete could organise drone races at Duxford. Drone track days out.....and I really need to keep taking my pills and go and lie down in a dark place. Link to comment Share on other sites More sharing options...
Colin Lindsay Posted January 10, 2022 Author Report Share Posted January 10, 2022 Just finished... will be there in, say, half an hour? Get the kettle on. 1 Link to comment Share on other sites More sharing options...
Badwolf Posted January 10, 2022 Report Share Posted January 10, 2022 Here's one Colin prepared earlier..... Link to comment Share on other sites More sharing options...
Chris A Posted January 10, 2022 Report Share Posted January 10, 2022 1 hour ago, Badwolf said: We could start a design thread for drones using Triumph parts. Radiator fans for the propellers, the exhaust gases can give propulsion . . I think I'll go and find a dark corner as well Link to comment Share on other sites More sharing options...
Colin Lindsay Posted January 10, 2022 Author Report Share Posted January 10, 2022 1 hour ago, Badwolf said: Here's one Colin prepared earlier..... If I had, it wouldn't work. Believe me from experience.... Anyway that one looks more like a biker carrying three alcohol optics. Mobile bar anyone? Link to comment Share on other sites More sharing options...
Chris A Posted January 10, 2022 Report Share Posted January 10, 2022 1 hour ago, Colin Lindsay said: If I had, it wouldn't work. Believe me from experience.... Anyway that one looks more like a biker carrying three alcohol optics. Mobile bar anyone? Only spotted the 'Triumph' sticker when I looked at it for a second time. I really do need to find a dark corner . . . Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now