Jeffds1360 Posted April 21, 2022 Report Share Posted April 21, 2022 Do these OK to you guru's? I've had enough fiddling about this week. Link to comment Share on other sites More sharing options...
Gary Flinn Posted April 22, 2022 Report Share Posted April 22, 2022 They don't look too bad According to the Body Fitting notes the gap between the vertical edge of the Bonnet and the doors should be 5/16" (8mm) The gap between the rear edge of the door and the 'B' Post is tighter at 3/16" (4.8mm) Attached is the PDF on how to get things fitting correctly on the Herald/Vitesse Herald, Vitesse Body - Svc Trg Notes.pdf 1 Link to comment Share on other sites More sharing options...
Chris A Posted April 22, 2022 Report Share Posted April 22, 2022 If the gaps are even I wouldn't worry, won't spoil the pleasure of driving the car. As my wife would say, from here days as a theatre costumière - "a blind man on a galloping horse would be happy to see it" 2 Link to comment Share on other sites More sharing options...
Pete Lewis Posted April 22, 2022 Report Share Posted April 22, 2022 i would twiddle the tie rods to reduce the bonnet to screen panel down to around 10mm its looking bigger than that so close it up a few mm Pete Link to comment Share on other sites More sharing options...
Jeffds1360 Posted April 22, 2022 Author Report Share Posted April 22, 2022 :0 Yea, thanks. It is a bit 'grand canyonish' but at least it is even. Doors are good to B post, except a 1/4" tub spread on N/S. bottom. When I got it, both doors caught on the wings! Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now