Colin Lindsay

Herald headlamp cowlings in stainless… nice but heavy…. but as I mentioned in an earlier thread on the subject I’d love to see Herald overriders, particularly rear ones, in some kind of material that doesn’t rust from the moment they’re fitted.

I do hate that sort of ad soooo much; so does eBay and some of the advertisers have had their accounts suspended as being against the rules. I’d be tempted to advertise as ‘breaking Spitfire 1500’ and let prospective purchasers make contact and ask if a specific part is available; even advertising a few parts as a ’normal’ eBay advert may surprise you as to what is sought-after and what parts will sell. Even a rusty chassis, sold as ‘collection only’ can be useful for restoration or repair sections, so don’t throw anything out until you’ve tried to advertise it first.

Silly question, and not wanting to insult your intelligence: you’re sure it’s not just tyre noise? I’ve had to swap tyres over on moderns more than once when new tyres made too much noise on one axle but quietened down on the other… just a thought!

I think the OP wanted either a Herald or Vitesse? Nice though the GT6 may be and practical as the 2.5 saloon is, they’re totally unlike the Herald or Vitesse in either drive quality or owner experience. I think Mike’s answer is the most sensible; go to the show and see how it actually feels to sit in one. Personally I love the Herald for the simplicity of maintenance and the unique driving experience.. good basic motoring.

Yes, I know what you mean... but a modern car would be full of modern refinements and not using 1960s technology or parts; which I feel are part of the attraction. That’s why I love them…. real pumping valves and diaphragms in a fuel pump, not just electronics. Solid-state electronics spoiled the fun of working parts; almost like clockwork toys vs battery-power. And, in particular - no sensors in an original Triumph - hooray!! (Bane of my life... O2 sensors, ‘intelligent’ suspension sensors, brake sensors… hate ‘em!)

Fuel starvation? It may not be at the engine end! If so, suspect something blocking the fuel lines, so remove, flush and replace, and maybe fit an inline filter; make sure all breathers are unblocked. Something is building up to breaking point as the car drives, but then after a period of sitting idle - draining back? - it works again. Try that angle and see if things improve.

They wouldn’t be making a 1960s car in 2015, so it’s a moot point. I don’t mind upgraded lights, alternator, polybushes or electronic ignition - and yes even modern windscreen glass - but I do bite my lip when faced with a type 9 gearbox / Subaru diff / Mazda engine / Rover seated offering that the owner claims is better than original. Sometimes it would be more original to put a Triumph bonnet on a modern and call it a Triumph… It’s the owner’s prerogative, but similarly if I don’t want to, I don’t like being called dangerous, unreliable and Luddite.. and that’s just ME…. so it’s up to personal choice.

Take care - that’s the only real advice! However: covering the hole with masking tape can help alleviate the damage caused by the gun moving abruptly when the trigger is pulled but have you ever used a short length of brake pipe or other metal pipe over the rivet shaft? This holds the rivet away from the gun nozzle, and if there’s a snap, the gun is half an inch or so away from the paintwork. Dipping the rivets in grease or Waxoyl also helps rustproof them when fitted.

It’s a learning curve.. but all the more satisfying when you work it out. We’ve all been there! (battery connected back to front, dizzy on 180 degrees out… it happens!)

I didn’t find any great improvement with the 123 and so sold my unit a few years ago. Like my digital camera there were just too many features on it that I’d never use. I just like the fit-and-forget style of the under-cap systems and although my Aldon system was this type it failed after about two years. The red SimonBBC unit has been going great for quite a bit longer and I’ve bought since some for my Heralds.

I used the SimonBBC versions from eBay : http://www.ebay.co.uk/itm/Lucas-25D-25D4-POWERSPARK-electronic-ignition-kit-/110581394489?pt=LH_DefaultDomain_3&hash=item19bf2a2c39 Aldon gave up on me while Optronic was too much bother. That link is just to a sample of what he sells; check his other items to confirm the one you require. I’ve found them excellent quality over the years.

The last GT6 outrigger I bought has a strap on the top flange which is meant to be folded down the inside of the chassis main rail and welded where accessible. I haven’t seen any Herald / Vitesse ones like this but suspect they’re the same these days. Incidentally that link to the Service bulletin page doesn’t work?

Yes cat litter is excellent for oil, really unbelievable for soaking up huge quantities off clean concrete… don’t ask how I know but the cat didn’t go for a week afterwards until stocks were replenished. The problem with this stuff - power steering fluid - is that it dripped heavily for about two weeks until a replacement pump arrived and was fitted, so there’s discoloured patch about two feet by two feet where the bonnet of the Discovery usually sits. No cleaner known to man - or me - has so far done anything to it; I think it may come to digging out the patch of tarmac and refilling. The drive is overdue for a topcoat anyway; I’ve been recommended a product called Bitumen Coldfix which brushes on.

It’s on.. it’s off.. it’s on… it’s off…..

Any tips on removing this horrible substance from a tarmac driveway? It covers an area of about four square feet following a leak on the Power Steering pump on my Discovery and nothing that normally removes engine oil will touch it. Three months or so on from the pump replacement and it’s still sitting there, discoloured brown and apparently unremoveable except by digging out the affected area of tar... Anything I should try?

It may be indeed; the last set of ‘new’ rear overriders I bought were badly crazed within a few years of purchase, and the amazing thing is that this was without them ever being near a road.

Still waiting final developments through the Club Shop; I was intending to sell this one at Stafford a couple of years ago but it got itself donated as a template for trial remanufacture… hopefully it will be feasible to remake them.

If anyone is interested, I have a brand new never-fitted aftermarket 6-cylinder rev counter that fits anywhere the driver wants it to go; rectangular design and looks quite nice. Only downside is that it’s for positive earth and so may not be suitable for many of our Triumphs. Any use to anyone?

Just find one with reclining seats and develop that Triumph slouch…. I’m 6’ 4” and have no problem in a Mk1.

Those look good and yes the lack of rust is a real bonus. Can they supply Herald rear overriders? Must check….

Find one of the early pumps with the nut on the front pulley and rebuild it. Bearings and seals are all readily available.

Here’s a photo of my old one, blasted and primed but now somewhere in the ether of being used as a template to have new ones remanufactured. Hopefully lighter too, they weigh a ton.

Ok so it’s NOT just me… as usual I was blaming my own PC…. Thanks guys

How do they compare with good chrome as regards shine? I’ve never seen any of these and it’s hard to tell from a photo on the seller’s webpage; is there a good depth of shine or just reflective steel?

I can’t access the James Paddock website at jamespaddock.co.uk, all I get is a meaningless jumble of code and error messages. All other websites are fine. Anyone else experiencing this? Colin