Jump to content

Rear brakes herald 13/60


iana

Recommended Posts

Given the cracking weather I thought I’d have a quick check over the herald, noticed the brake fluid had dropped a bit, leak on rear wheel cylinder. So stripped the brakes, replace the hose and the cylinder, cleaned the adjuster. Came to put the springs back on the shoes and the manual differed to what was on the car

the lower photo is as it was, the top photo is where I have put the springs - which is correct or does it not matter?

the split pin has been installed (just after the photo taken)

IMG_0013.thumb.jpeg.feecbe7d6a489998f19bd3b047cbe012.jpeg

IMG_0010.jpeg

Edited by iana
Photos wrong way round
Link to comment
Share on other sites

Thanks Colin, self doubt I guess creeping in, I can remember them being a pain to do and in front of the shoes just seemed too easy. Really could do with getting an old copy of Haynes manual as I have the soft back one and the images aren’t great

Link to comment
Share on other sites

  • 3 weeks later...
On 21/04/2024 at 19:21, iana said:

Thanks Colin, self doubt I guess creeping in, I can remember them being a pain to do and in front of the shoes just seemed too easy. Really could do with getting an old copy of Haynes manual as I have the soft back one and the images aren’t great

I have a softback one for oily hands and left in the leaky boot; a hardback for clean hands and a genuine workshop manual for desk use only. Haynes have really shot themselves in the foot with the modern manuals printed on newspaper. The photos are almost illegible from the high contrast and bleed.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...