Pete Lewis Posted November 10, 2018 Report Share Posted November 10, 2018 just a single lobe , one turn of crank should give you 1/2 turn of the cam on refitting make sure the lever sits on the cam , not get hooked under it Pete Link to comment Share on other sites More sharing options...
terryj Posted November 10, 2018 Report Share Posted November 10, 2018 Many thanks - all sorted now. One turn of the crank did the trick so you were absolutely right. Thanks again. Terry Link to comment Share on other sites More sharing options...
Pete Lewis Posted November 10, 2018 Report Share Posted November 10, 2018 Pleased its all worked out Pete Link to comment Share on other sites More sharing options...
pirate Posted November 11, 2018 Author Report Share Posted November 11, 2018 Poppyman the fuel priming bubble worked a treat, got fuel up to the pump then used it at the carb, it got fuel to there too. I had fitted a new electronic distributor, cranked her over using the new solanoid with start button while turning the distributor and she fired up. only running on 2 cylinders though, Nos 2 & 3 took plugs out of 1 & 4 cleaned them and checked for spark, which they both have. will have to go post in the ignition forum for some advice on this. Thanks for all your help, the car starts on first crank even on 2 cylinders! Link to comment Share on other sites More sharing options...
poppyman Posted November 11, 2018 Report Share Posted November 11, 2018 Great stuff Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now