PeteH Posted June 5, 2021 Report Share Posted June 5, 2021 👍 Link to comment Share on other sites More sharing options...
Pete Lewis Posted June 5, 2021 Report Share Posted June 5, 2021 so what made the hub fit ?? on better Pete Link to comment Share on other sites More sharing options...
johny Posted June 5, 2021 Report Share Posted June 5, 2021 An extra Weetabix? 😂 Link to comment Share on other sites More sharing options...
Jeffds1360 Posted June 5, 2021 Author Report Share Posted June 5, 2021 yes ! Took it all off again and concentrated in getting trunnion on as far as possible, using an ancient large box spanner I have, with a 7lb mel. It worked. Got within 1/2" of target. Cleaned up the key way and ensured key was sat in cleanly, gently fitted hub over and gently tapped it on, and on.... and on !! woopy, plenty of thread, washer and nut on and managed to get the whole unit on another 1/4". just using a 1" ring spanner and body weight. It made a nice creak/eek as it slid on. Must find correct socket and my torque wrench tomorrow Got new needle bearing, ball bearing,oil seal & gasket etc on that end plus the axle has a new uj but that has a minute bit of play. Can you get thicker circlips? Just tiny play on one cross piece. May as well have it perfect and maybe swap it when winter comes. Thanks again for "bearing" with me Link to comment Share on other sites More sharing options...
Pete Lewis Posted June 5, 2021 Report Share Posted June 5, 2021 canley classics sell over size circlips of various thickness Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now