Panel under Dash - sketch

[Alex59]

Hi everybody, 

i'd like to change the big panel under the dashboard, but i don't want to buy the panel, i'd like to do it by my own. My panel is in very poor condition, some parts is missing.
So i'd like to know if somebody own the skecth of this part and can share it.

Thanks for your answer

Alex

[Dick Twitchen]

Alex, 

What model of car would be a good starter for the help you will definitely receive.

Dick

[Alex59]

Sorry, i own a vitesse MKII 1971

[Pete Lewis]

mine was well shot but enough to use as a template , cut one from hardboard 

in two sections 

the base fold was a separate length glued with silicon bead 

making in short sections helps the refit 

instead of buttons i used spire clips on the brackets and large faced tap screws 

Pete

 

 

[Paul H]

I used this Felt Support from Screwfix 

https://www.screwfix.com/p/felt-support-tray-1-5m-5-pack/36622
From memory it was made in 2 sections . The break being the Steering wheel . The felt support is plastic which can be cut n trimmed with strong scissors or a jig saw . The trays have a preformed bend which I screwed to the bulkhead . The trays are flexible and was able to bend them to stay under the dash without permanent fixing . I used the old mill board as a template . There are 5 support trays to a pack . My car is a Vitesse mk2 

Paul 

 

[Alex59]

Thanks for your answers