haggis Posted June 22, 2021 Report Share Posted June 22, 2021 Hello, anyone got a reasonable condition Fan switch bezel for a Gt6 mk1 they could spare, it’s one of the chrome rings with about 5 dents around the outside that screws the switch to the dashboard. thanks hag Link to comment Share on other sites More sharing options...
Colin Lindsay Posted June 23, 2021 Report Share Posted June 23, 2021 I have millions of them from Heralds, hopefully one will be correct for the GT6. I'll confirm asap if they're the same. Link to comment Share on other sites More sharing options...
Colin Lindsay Posted June 23, 2021 Report Share Posted June 23, 2021 Have just checked, there are quite a few different sizes and more worryingly a couple of different threads, so I took the one off my own old switch until I found another that fitted. I think this is the correct one. Link to comment Share on other sites More sharing options...
RogerH Posted June 23, 2021 Report Share Posted June 23, 2021 15 hours ago, haggis said: Hello, anyone got a reasonable condition Fan switch bezel for a Gt6 mk1 they could spare, it’s one of the chrome rings with about 5 dents around the outside that screws the switch to the dashboard. thanks hag If you can confirm the diameter of the threaded part of the switch then I believe the thread size will follow suit. I have some spares of the TR cars. Otherwise I can make you one in Ali or brass Or can you see your switch on Moss or Rimmer and forward the part number - that may help. Roger Link to comment Share on other sites More sharing options...
haggis Posted June 23, 2021 Author Report Share Posted June 23, 2021 Thanks guys. I’ve measured the inside diameter thread as 1/2”, Colin your one looks good, if it’s 1/2” let me know what you want for it. thanks hag Link to comment Share on other sites More sharing options...
Peter Truman Posted June 23, 2021 Report Share Posted June 23, 2021 methinks Colin's your best bet as over the years/models the outer dia of the bezel varied and the ID and the thread depended on its use cable or switch and size of switch. The daughters Mk2 Spit had different OD sized bezels on the lower row of controls/switch's but over 20 years I've managed to achieve a set where the OD's all look the same. Yep I know I'm pedantic, or just over the top! Years ago I brought from the states a set of bezel tightening up tools they have a set of hardened prongs that engage the grooves in the bezel there's 2 different outside dia's and one for the flat slotted bezel there brilliant. Link to comment Share on other sites More sharing options...
Colin Lindsay Posted June 24, 2021 Report Share Posted June 24, 2021 Confirmed as 1/2 inch. PM me your address. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now