Jump to content

johny

Forum User
 View Profile  See their activity

  • Posts

    7,022

  • Joined

  • Last visited

  • Days Won

    38

 Content Type 

Everything posted by johny

  1. johny
    Thats it and there should be some sort of short coil spring with it that pushes back against the rocker and of course a pin that may or may not have ever been used...
  2. johny
    Ah sorry read original post as cylinder 1 so 4 is more understandable. Any chance the rocker shaft end cap fell out as you removed the cover? Could it be in the engine bay or garage?
  3. johny
    Either way (TDC exhaust would have had both valves open) I think theres something wrong with the valve timing so yes drain coolant, rad out, pulley off and then cover. Check chain/sprocket and crank seal ring condition, replace tensioner, gasket and seal? Using manual set valve timing and ensure cover fixings are put back in correct places... Then drive off into the sunset at max power😁
  4. johny
    Not sure you got the procedure quite right as of course theres two TDC positions for piston 1. After setting the gaps I would have turned the engine until valves 1 and 2 are in rocking position and then see where your pulley indication is (TDC firing)....
  5. johny
    yes that was my postulation but why did it wait until then to do it? Ahhhh but was the end cap in place, though loose and held on by the rocker cover, so that then on removing the cover it fell out somewhere and the rocker was free to slide along? However was the prior loss of compression on the same cylinder pure coincidence🤔
  6. johny
    See my previous conjecture although I now see this engine doesnt have collets as such - the spring cap has off centred holes so you put it over the valve stem (spring compressed) and then slide it over to lock. However I think it could still be released as I suggest but what I dont understand is how the engine ran so long with the rocker shaft end cap missing or how the loss of compression (the original problem) is related....
  7. johny

    Two post car lift

    johny replied to Pdv's topic in General

    Also look on ebay for lifts, some including installation...
  8. johny
    I agree with you Dan, engine highly unlikely to be a GE either. All indications point to it being a 1147 (GB?)
  9. johny
    yes and as I say except for the chrome its a bit humble compared with Unkels all singing, all dancing jobbie😊
  10. johny
    I think it might have had a colour change somewhere along the line having been white originally....
  11. johny
    Yes if only they did a chrome version😍
  12. johny
    Triumph are famous for the often poor quality of the stamping of serial numbers on components so I wonder if it isnt GE that looks like an F? Easily done on the production line or maybe the other guy was using the E stamp already....
  13. johny
    Wow Unkel that is a posh one! I was thinking of one of these:
  14. johny
    Hmmm yes some suppliers arent so quick when theres no money in it...
  15. johny
    Ask the supplier?
  16. johny
    yes the good ol days with a wodge of cash! Not the same now waving your phone and saying youll do a bank transfer but a bit safer I suppose😁
  17. johny
    Cant make out how the valve came free! Oh yes I can - without the end cap the rocker moved along the shaft and pushed on the valve spring cap instead of the valve stem so the collets fell out and the valve was free to fall into the cylinder. It might have then been pushed up by the piston against the valve guide so that got forced out of the head🙁
  18. johny
    oh dear I take it back then, Dan could be right and there is significant damage in the cylinder☹️Definitely got to remove head now...
  19. johny
    Have you got the paper type filter in the right way? The flow is best towards the cone of paper so you can see whats stuck to the outside of it and no need to cut open...
  20. johny
    True Doug but I feel paper stops far more than plastic mesh and sorry dont agree on breaking glass compared with plastic (not keen on the original glass bowl fuel pumps for the same reason).
  21. johny
    Couldnt have fallen in running or there would have been a big bang!
  22. johny
    If he was really ingenious there might be a quick way to do it but youre definitely missing some bits and I take it you probably want a proper job done? Did the valve and rocker come off in your hand (honest guv!) or were you investigating?
  23. johny
    Unfortunately I think the head probably has to come off to sort the valve and guide out...
  24. johny
    Now I can see in the video the rocker shaft seems to be loose as if its mounting post attachement isnt done up enough. There should also be a cap on the end of the rocker shaft held in place with a pin into that hole and which keeps the last rocker from coming off....
  25. johny
    errr youve got a problem there! The valve seems to have disappeared presumbably into the cylinder so dont turn the engine at all. Thats the valve guide youve got in your hand and thats supposed to be fixed into the head...
×
×
  • Create New...