Jump to content

martyn wright

TSSC Member
  • Posts

    652
  • Joined

  • Last visited

  • Days Won

    2

Everything posted by martyn wright

  1. Hi Colin!  I am cleaning up my Brake & Clutch Master Cylinders on my 1600/6 and was going to fit the Repair kit(GRK1029), but I am unable to find any proper diagrams of how the rubbers should fit?  When I took the retaining clips out on both, there was nothing inside apart from the piston?  Can you help?  Best wishes Martyn

    1. martyn wright

      martyn wright

      Hi Colin I think I have sussed it out!  Cheers Martyn

  2. Hi! Pete! The Cooper/Black/Bronze plate is on the same side as the Cmm Plate, I will check it when I get the car back from the Body Shop...Thanks for your Help Hi Dave! D you know how many Mk1 Vitesse 6 Conv there are in the TSSC? Cheers Martyn
  3. I really don't know? I just re-read the letter and it states that and I quote "At the moment(29 Apr 2003) there are only about a dozen Vitesses 6s later than yours , known to the register!" Comm No: HB33176 CV where is the Body No? I have the comm plate and also on the car is a "Black/Bronze plate"? I have the copies of DVLA searches going back to the first owner with the Owners Name & Address in 1968 (Stamped Kent CC 27 Nov 1968) then the 1st Change a Mr Skipper S.W.20 (no Date) and lined out? then 2nd Change: Mr Geldkorn N.W.20, dated 24-11-70 and attached to this is "Extract from Reg Doc Kent CC 16 Jan 1970" which has Comm No HB33176CV and Body No as HB33259HE which is also the Engine No! Does this make sense? Cheers Martyn
  4. Hi All! Some years ago I owned a YTH190N Triumph Spitfire Mk4 in Blue. Yesterday I was going through some photos and found 2 x pictures so I went onto the DVLA sight to see if it was still on the road! To my surprise, I found the car Logbook was issued in Nov 2019 but now in Red and was wondering if anyone in the TSSC owned it? I also found a couple of pictures of my old Dolomite 1850 Reg BDG377K, but this was not showing any information! Cheers martyn
  5. Hi, I have 1966 Mk1 1600 Convertable (12 July 66) they finished this model in September 1966), and back in 2003 was told by the TSSC that mine was the 12th./13th oldest in the Club! (No actual figures where given)? When I rejoined in 2017, TSSC could not give me any information whatsoever due to Data protection? Cheers Martyn
  6. Hi All! I used Maguires Lens cleaner on my Volvo XC90 as they were clouding up, and it works really well! Martyn
  7. Hi! Have a look at Paddocks Triumph? Under "Body Fittings" FS2704 "Seat Runner Front to Floor" and FQ3406 " Cheers Martyn
  8. Hi Tom! Welcome back! I agree, that prices can vary dramatically, To be honest, I tended to use Canley Classic a lot? "Dave" also has Secondhand Parts available? and he is reasonable on those too. I have sourced parts from Members at Sports Six and Ebay, its a case of checking every price that you have, but if in doubt contact the Club for information the Members are brilliant and you also get a bit of banter to lift your day! Good Hunting Martyn
  9. Hi I got my carpets from Don Hoods! I have not opened them yet as still putting Vitesse back together! Not sure if they do moulded. .....Best ...Martyn
  10. Should have asked, I paid £10 for a Vitesse Laminated Coloured Wiring Loom Diagram, could have sent you a copy? Okay wrong car??? Cheers Martyn
  11. Hi! Had them on the car when I found it back in 1998 but went into storage and a lot of the bits got nicked! Including Hood and Frame? so up the creek without a paddle! Thanks for the info, "your car looks nice" mine is the same colour(56) but a Mk1 1600/6 Cheers Martyn
  12. Thanks Gary! I have never seen one? but do I need one for my roof is the question? Cheers Martyn
  13. Hi All! 33 been watching but no comments? Must be able to get one from somewhere? Cheers Martyn
  14. Hi All! Thanks for the Information. Just had a message from Dave at Canley. He had one there but said it was rusty! He checked his cars and said that the plate was missing from all of them and basically not to bother. I will more than likely weld the hole up? Many Thanks Martyn
  15. Hi Its Part 36 under the tank? Canleys are looking for a Second hand one at this moment! Cheers Martyn
  16. Hi All"! Anyone knows where I can find a Drain Plug Bracket which sits under the Petrol Tank ? Cheers Martyn
  17. Hi All! Any Idea where I can get a Hood Header Front Finisher - 609602 Black? Rimmer do not have them nor does Canley, Asked Canley for second hand but no luck! Cheers martyn
  18. Trying to find a Hood Rear Top Chrome Finisher - 804066 £33 from Rimmer, so went to Second hand parts at Canley Classics and got one for £15 + Vat = £18 Well Happy! Ebay wants £65 = £15 postage??
  19. Hi All! Can anyone tell me what this is in the photo is please? The nut at the top unscrews? and where it goes? That's if it belongs to the Vitesse? Many Thanks
  20. Hi All, Just an Update on the Resto of KYK711D, these where taken last week apart from the Last Pic which was just before I stripped it down in 1998! Cheers Martyn
  21. Hi All! On the rear deck, about 4 inches from the hood and dead centre, I have a 1 inch hole? On the deck panel underneath is a frame, with a 3 inch hole for access either from the hood side or the boot side where the wiring travels across the car! Aerial my be?? Anyone know? Cheers Martyn
  22. Hi All! Rear Light Reflectors Pt No 121401 Any idea where I can get these from? Canley £16.50 each & Rimmer £22.20 each! Is there anywhere that are cheaper? Kind regards Martyn
  23. Hi Pete! Hope you are well! I have a Black Cover and a Silver Air Box, I see you have uprated the Clutch and Brake Cylinders? What is the Red rocker box for? Cheers martyn
  24. Hi! I paid around £240 at Sparton Motor Factors, they did a excellent job and have a separate division for Cooling ie Radiators? They are based in Wales and England. Cheers martyn
  25. Hi All! I thought I read somewhere that the earlier Vitesse 1600s had a Black Rocker Cover and the later 2 Litre models had Silver Rocker Cover? My 1600/6 is the later model (July 66)has a Black Cover is that correct? Cheers Martyn
×
×
  • Create New...