Quack Posted June 4, 2022 Report Share Posted June 4, 2022 So I finally got round to wet sanding my car to remove orange peel…well unfortunately there were plenty of bumps that turned in to chips. No idea how to fix this now. I’m guessing I’d have to respray the whole bonnet? pretty devastated. Wish I’d never touched it. Link to comment Share on other sites More sharing options...
Pete Lewis Posted June 4, 2022 Report Share Posted June 4, 2022 dont be sad its not the first time Paint ......gets the better of most of us we painted my sons first Mini with JapLac from homebase and a brush and sponge roller remarkable result from nappy yellow to red and white in a morning it lasted 5 years cost about a £5 back n the late 80s Pete Link to comment Share on other sites More sharing options...
Badwolf Posted June 4, 2022 Report Share Posted June 4, 2022 Best Dulux household paint for my first car back in the 70s. Link to comment Share on other sites More sharing options...
Pete Lewis Posted June 4, 2022 Report Share Posted June 4, 2022 Dulux....posh git Pete 2 Link to comment Share on other sites More sharing options...
Badwolf Posted June 4, 2022 Report Share Posted June 4, 2022 Yes, Hillman Husky, Minx style, it lasted a little while til I sold it on....for an Austin Maxi. No idea what happened to it. Not on the DVLC database now. Link to comment Share on other sites More sharing options...
NonMember Posted June 4, 2022 Report Share Posted June 4, 2022 53 minutes ago, Quack said: So I finally got round to wet sanding my car to remove orange peel…well unfortunately there were plenty of bumps that turned in to chips. Oh dear. The trouble is, your primer coats were not flatted smooth before applying the colour. We made that mistake with my brother's Spitfire (my first attempt at a respray, although it was his impatience to get it done that drove our error). He just had to live with the orange peel. If you want a good finish, you absolutely MUST flat the primer to a smooth, peel-free dull sheen before putting the colour coats on. Mind you the first photo looks like you went right through at the back edge. A bit too aggressive with the sanding there. You would probably get away with only re-spraying the top panel. Take the waist trim off and mask under where it fits, so any masking edge line will be hidden. Link to comment Share on other sites More sharing options...
Quack Posted June 4, 2022 Author Report Share Posted June 4, 2022 Yeah I previous owner had done a poor paint job unfortunately. so far I have used a paint pen to fill in lots of the little chips, then I’m going to compound it and polish tomorrow and just fill in again if any more chips occur. Can’t really see another simple way around it. As for the rest of the vehicle, the drivers side has seen success, apart from some small odd patches where too much sanding seemed to bring out a lighter green layer of paint but it’s not too noticeable from afar. Link to comment Share on other sites More sharing options...
NonMember Posted June 4, 2022 Report Share Posted June 4, 2022 I like that colour combination. I'm tempted to add a white line on my Vitesse, to disguise the poor colour match between the original restoration and the bits I've rebuilt recently. 1 Link to comment Share on other sites More sharing options...
thescrapman Posted June 4, 2022 Report Share Posted June 4, 2022 Your bonnet appears to,be covered in micro blisters. So it may not have been orange peel to start with, but that. If it had been orange peel, it would have flatted out. To sort properly you will need to bare metal it I suspect. Link to comment Share on other sites More sharing options...
Quack Posted June 4, 2022 Author Report Share Posted June 4, 2022 8 minutes ago, NonMember said: I like that colour combination. I'm tempted to add a white line on my Vitesse, to disguise the poor colour match between the original restoration and the bits I've rebuilt recently. Yeah I have to say I couldn’t believe my luck when I found the car, it was the exact colour combo I envisioned when I was first wanting a herald! Link to comment Share on other sites More sharing options...
thescrapman Posted June 5, 2022 Report Share Posted June 5, 2022 Just spotted your other thread about the water mark. definitely micro blistering, water is getting under the paint, then popping the paint up in little blisters. Has been caused by the cover holding moisture over faulty paint. Link to comment Share on other sites More sharing options...
Quack Posted June 5, 2022 Author Report Share Posted June 5, 2022 Yeah it’s definitely got micro blisters all over the bonnet and cracked paint on the back. I guess it’s my own fault for still risking it regardless! Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now