Paul H Posted April 18, 2018 Report Share Posted April 18, 2018 Hi reassembling heater unit after fitting Nissan Micra blower motor and misplaced the O ring which secures the control valve to the heater matrix - Any idea where I can source one ? Also there is a lot of crud in the control valve - can this be dissolved ? Here's a pic of the Nissan Micra Blower motor in situ - There is an open vertical pipe on the motor , not sure what its for but just in case anything fell in fitted some plastic piping to prevent me dropping small bits n bobs in - Got the T shirt - The difference in air out put is significant Link to comment Share on other sites More sharing options...
Ben Caswell Posted April 18, 2018 Report Share Posted April 18, 2018 I carefully cut off a piece of heater hose and shaped it to fit seemed to work OK 1 Link to comment Share on other sites More sharing options...
Colin Lindsay Posted April 18, 2018 Report Share Posted April 18, 2018 Most suppliers seem to have it, listed as C9928A sealing ring or sealing O-ring. Seems to be about £1, they're common to MGs too. 1 Link to comment Share on other sites More sharing options...
Paul H Posted April 18, 2018 Author Report Share Posted April 18, 2018 Thanks Colin , couldnt find the O ring on Canleys so assumed incorrectly they were difficult to locate - Paul Link to comment Share on other sites More sharing options...
Colin Lindsay Posted April 18, 2018 Report Share Posted April 18, 2018 I've had problems with their search facility, couldn't find fuses the other day... it's not very simple to operate and gives some very strange results. Glad we found them! Link to comment Share on other sites More sharing options...
Pete Lewis Posted April 18, 2018 Report Share Posted April 18, 2018 Iv e used the idea ben posted shaved a heater hose to make a 0 ring ...when needs must Pete Link to comment Share on other sites More sharing options...
pirate Posted November 30, 2018 Report Share Posted November 30, 2018 I have done the heater fan upgrade and stripped and re sprayed the box in satin black. Ive put it back together but can't work out why I only have one hole to bolt the heater valve to the box? the flange has two holes, I must be missing something :( Link to comment Share on other sites More sharing options...
Paul H Posted November 30, 2018 Author Report Share Posted November 30, 2018 This pic should help Paul Link to comment Share on other sites More sharing options...
steveweblin Posted November 30, 2018 Report Share Posted November 30, 2018 43 minutes ago, Paul H said: This pic should help Paul Paul can I add your photo (with acknowledgement) to my web page: http://vitessesteve.co.uk/heatervalve ? Link to comment Share on other sites More sharing options...
pirate Posted November 30, 2018 Report Share Posted November 30, 2018 It has a clamping plate, better route through the bits on the bench must have it, doh! cheers Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now