Andrew Posted April 5, 2020 Report Share Posted April 5, 2020 Hello all i have been trying for the last couple of years to find the grease nipple on my prop shaft. So today had a good look all four wheels of the ground and I cannot find the blessed thing. After a bit of research I found the are three types of shaft a splined one a strap type one and a solid one. Is it possible to have a solid shaft with no sliding splines on and if so there would be no need for a grease nipple. Andrew Link to comment Share on other sites More sharing options...
johny Posted April 5, 2020 Report Share Posted April 5, 2020 There appears to be one on eBay at the moment for a 1200 Herald Link to comment Share on other sites More sharing options...
Colin Lindsay Posted April 5, 2020 Report Share Posted April 5, 2020 Which car, Andrew? I had a strapdrive on the Herald until Pete pointed it out, so replaced it for a solid prop - just a straight swap. The Gt6 has a sliding joint with a grease nipple, but the solid ones are too long and would require to be shortened for it. Link to comment Share on other sites More sharing options...
johny Posted April 5, 2020 Report Share Posted April 5, 2020 Must be some reason why Triumph went to variable length props.... Link to comment Share on other sites More sharing options...
Clive Posted April 5, 2020 Report Share Posted April 5, 2020 But soe UJ's do have grease nipples, or at least a blanking screw so one can be fitted. Yes, only heralds had solid props, and even then only some. Strap drive are a PITA (fixed one for a local by doing the unthinkable, removing the straps and bolting it up solid. Means the UJ's are out of phase, but stopped the horrendous vibration) Sliding spline are best as they are simpler to fit/remove, and allow a bit of movement of the engine/box. Or even better would be a CV joint, reserved for spitfire 1500s for some reason. Link to comment Share on other sites More sharing options...
NonMember Posted April 5, 2020 Report Share Posted April 5, 2020 1 hour ago, clive said: for some reason. Cost. As always. So the solid prop is the cheapest to make, and was fitted to Heralds, unless there was an NVH problem. The strap type is only a little more expensive and would often fix the problem. The sliding spline costs more still but is generally better for NVH, which was worth the cost on a Vitesse with its "silky smooth and silent" advertising persona. CV joints were expensive in the '60s but had become common by the mid '70s. Link to comment Share on other sites More sharing options...
dave.vitesse Posted April 5, 2020 Report Share Posted April 5, 2020 The Heralds is a 1950's car so solid props were part of the course then. Plus they are cheaper. The give was supposed to be in the straps, but not much! It was evolution I guess that sliding props came in. Dave Link to comment Share on other sites More sharing options...
johny Posted April 5, 2020 Report Share Posted April 5, 2020 10 minutes ago, NonMember said: Cost. As always. So the solid prop is the cheapest to make, and was fitted to Heralds, unless there was an NVH problem. The strap type is only a little more expensive and would often fix the problem. The sliding spline costs more still but is generally better for NVH, which was worth the cost on a Vitesse with its "silky smooth and silent" advertising persona. CV joints were expensive in the '60s but had become common by the mid '70s. Orrrr was it that Triumph were too far out on chassis dimensions and it was easier to fit a variable length prop to accommodate the differences😂 1 Link to comment Share on other sites More sharing options...
Andrew Posted April 6, 2020 Author Report Share Posted April 6, 2020 Ho all The car is 1971 Herald. The prob a si said before is a solid type. I have had it balanced by a pro and they added weights in the appropriate places. No vibration at all. I think i am looing for something to do as i have time on my hands. Link to comment Share on other sites More sharing options...
johny Posted April 6, 2020 Report Share Posted April 6, 2020 Stick with it if it works as the sliding joint can bring its own problems.... Link to comment Share on other sites More sharing options...
Colin Lindsay Posted April 6, 2020 Report Share Posted April 6, 2020 28 minutes ago, Andrew said: Ho all The car is 1971 Herald. The prob a si said before is a solid type. I have had it balanced by a pro and they added weights in the appropriate places. No vibration at all. I think i am looing for something to do as i have time on my hands. The Devil makes work for idle hands.. join the club! As I've said I've used a solid prop on the Estate, and will also use one on the convertible, and can't see any problems. Link to comment Share on other sites More sharing options...
dave.vitesse Posted April 7, 2020 Report Share Posted April 7, 2020 I agree, having used Heralds as every day cars and not had any problems. Dave Link to comment Share on other sites More sharing options...
blubayou Posted April 19, 2020 Report Share Posted April 19, 2020 If it's any help, when I put my overdrive in many years ago the propshaft that came with it was a strap drive with mangled looking straps. It went to Dave Mac for checking & came back with weights fitted sprayed black and no straps! Like Clive mentioned above he'd chucked the straps away and bolted it solid. It's still like that today with no ill effects I'm aware of & no vibration. Link to comment Share on other sites More sharing options...
dave.vitesse Posted April 20, 2020 Report Share Posted April 20, 2020 As interest the sliding spline was introduced to stop the loading of the input bearing of the diff due to the movement of the engine and gearbox. It probably made assembly easier as well. Dave Link to comment Share on other sites More sharing options...
Andrew Posted April 20, 2020 Author Report Share Posted April 20, 2020 Thanks to all for the advice. So solid prop no grease nipple. Now what can I worry about. regards Andrew Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now