Jump to content

Paul H

TSSC Member
 View Profile  See their activity

  • Posts

    3,083

  • Joined

  • Last visited

  • Days Won

    27

 Content Type 

Everything posted by Paul H

  1. Paul H
    SOLD within 1 Day Paul
  2. Paul H
    Budget £2k for the overdrive Paul
  3. Paul H
    Good buying opportunity somebody for their Herald , Vitesse , GT6. This won’t be on EBay for long https://www.ebay.co.uk/itm/186254698764?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=Qw3CLEVcSkG&sssrc=4429486&ssuid=WOrzrqDcRZu&var=&widget_ver=artemis&media=COPY Paul
  4. Paul H
    I’ve used Martrim https://www.martrim.co.uk/ For a headling for a MGBGT Sunroof and they sell heatproof glue.Another supplier to check out is Woollies Paul
  5. Paul H
    I mot my Vitesse every year, peace of mind. The local mot guy lets me sit in the car to assist and then allows me in the pit to view the chassis. Paul
  6. Paul H
    Yes that was me. As Uncle Pete says if it was good enough in the day why change . So Fram filters are the ones I use and change every 2 years Paul
  7. Paul H
    I used https://www.screwfix.com/p/felt-support-tray-5-pack/36622 it was left over from a roof repair. Did an excellent job, even the folds in the trays are in the right place !! Paul
  8. Paul H
    In the end purchased Fram PH966B for my Vitesse from https://www.arnoldclarkautoparts.com/products/fram-oil-filter-ph966b?_pos=1&_sid=55a69e467&_ss=r purchased 3 for £19.75 delivered Paul
  9. Paul H
    Sorry should have said spin off . Paul
  10. Paul H
    Any recommendations, normally buy a few so some time since I bought some Paul
  11. Paul H
    What’s the spec of this clutch ? Paul
  12. Paul H
    I’ve got cdse’s on my Vitesse which I believe are the spec for the mk3 gt6 . There was a few issues with setting up with fuel gasket leaks , rubber slithers , new float valves , bent jet , incorrect jet height . All these issues are fixed and the cdse’s have been behaving for the last 4 years now Paul
  13. Paul H
    I used a piece of black plastic sheet split in 2 with a U section in each to cover the drain plug . Slide the 2 sections together locking the drain plug and silicone in . Easy to remove if required Paul
  14. Paul H
    Can’t agree with the Club Shop sealing kit . Very much overpriced and there are better solutions . Paul
  15. Paul H
    I used SilentCoat, very easy to use . Heat up first with a heat gun . For the contours use a 2ins roller used for sealing wallpaper joins. https://www.deadening.co.uk/products/silent-coat-2mm-deadening-mat?
  16. Paul H

    Electric Vitesse?

    Paul H replied to ahebron's topic in General

    100 mile range and £20k - not for me Paul
  17. Paul H

    Exhaust Manifold

    Paul H replied to stebec's topic in Engine

    Assuming you don’t have a WSM you can download one free from this link . VitesseSteve site is a valuable source of info for our Triumphs http://vitessesteve.co.uk/ Paul
  18. Paul H
    The club shop ones are dull and look like the originals Paul
  19. Paul H
    I found using a ply board was useful when pulling the gearbox from my Vitesse . The board acted as a “skid” making it easier to manoeuvre in and back in and also protects the carpet Paul
  20. Paul H
    My understanding is that welded seams were used by all manufacturers, which are no longer available unless you can buy NOS which is very rare . All replacements have stitched seams Paul
  21. Paul H
    8 metres for both doors co baines DX 73 Paul
  22. Paul H
    Probably volume plus a lots of hours to produce Paul
  23. Paul H
    As far as I’m aware the only silicone colour the club shop has is black Paul
  24. Paul H
    Looking to re spray my quarter lights and remove prior to spraying and replace the rivets holding the quarter light catch Canleys and usual suppliers don’t list them . Anybody know the spec? Paul
  25. Paul H
    The EBay sunroof sold for £920 . If the top vinyl was black instead of brown I believe the price would have topped £1,000 Paul
×
×
  • Create New...