Nigel Clark
-
Posts
1,088 -
Joined
-
Last visited
-
Days Won
2
Content Type
Profiles
Forums
Blogs
Gallery
Downloads
Store
Events
Everything posted by Nigel Clark
-
Awful news, just wishing Mark improved health. The Triumph community will be much poorer without Jigsaw. Nigel
-
ACF Howell in Walsall did an excellent job rechroming the rear bumper of my GT6. Cost £290. Nigel
-
I had a Lidl motorcycle cover once. Bike got soaked. The bike now has a shed and the cover is over the lawn mower, the spare one that I don't use! Mower and cover need to go to the tip. Nigel
-
Normal on my 1972 GT6 has always been about 40% of full gauge deflection, ie slightly below midway. Anything more and the engine is getting too hot in traffic etc but comes back to the usual reading when in the move. Could your thermostat be faulty? Nigel
-
+1, I bought one of those recently. The thread seems very tight in the sump. I put it in with a couple of turns of plumbers ptfe tape to seal the threads. Seems okay so far. Nigel
-
+1, the 308788 is an excellent cam. However, if you want a bit more at the top end, Chris Witor fitted a version of this cam with higher lift on the inlet valves, code CW3021. I recently fitted one to my 2.5 litre GT6 conversion and am very impressed. My impression is no loss of bottom end and more power above 4000 rpm. I will be putting the car on a rolling road when the engine has done a few more miles, that should really show how good the cam is. Nigel
