johnb Posted November 24, 2016 Report Share Posted November 24, 2016 Hi folks, I am in the process of restoring a Mk 3 GT6. Currently, I am refitting the doors. I fitted the bare door to check the gaps etc. All was well. I then fitted the door seal to check the door still closed ok. Again all was well. When I fit the door card, the door will not shut without forcing it. See marked carpet photo. The card appears to be too big for the aperture. I have made a template that fits the door and has sufficient clearance inside the door seal to allow the door to fit against the seal? This card is quite a bit smaller that the original, see Doorcard photo. Has anyone else had this problem and how do you get round it. Thanks in anticipation, John Link to comment Share on other sites More sharing options...
Pete Lewis Posted November 24, 2016 Report Share Posted November 24, 2016 This can be also aggravated by after market oversize balloon door seals pete Link to comment Share on other sites More sharing options...
Gully Posted November 24, 2016 Report Share Posted November 24, 2016 I replaced the door cards on my GT6 last year with the heritage ones from Park Lane Classics. The GT6 door card is sandwiched between the door and the seal, so as Pete says, if you have an oversized seal then you will struggle. That said, I've never seen a GT6 door card with a thick carpet finish as shown in your photo and suspect that may be your problem. They were originally vinyl top half and a very short pile material bottom half stuck to thin hardboard. My passenger door card took a few months of being closed before the pile material compressed sufficiently to return to normal operation! Gully Link to comment Share on other sites More sharing options...
AidanT Posted November 25, 2016 Report Share Posted November 25, 2016 Rarebits sell the correct style door seals Aidan Link to comment Share on other sites More sharing options...
Darren Groves Posted November 25, 2016 Report Share Posted November 25, 2016 Rarebits are closing down unfortunately, he had run out of the correct door seals when I enquired a few weeks ago. He has stock of some stuff still, but he is running it all down Link to comment Share on other sites More sharing options...
AidanT Posted November 25, 2016 Report Share Posted November 25, 2016 That's a Pitty. A man with great knowledge Aidan Link to comment Share on other sites More sharing options...
Pete Lewis Posted November 25, 2016 Report Share Posted November 25, 2016 Heck thats a serious loss , Bills been a mainstay for decent parts over the years thought it was in his blood , but things change I hope his guru on original history will remain . if you need seals of any sort these guys make most https://www.coh-baines.co.uk/ Link to comment Share on other sites More sharing options...
dougbgt6 Posted November 25, 2016 Report Share Posted November 25, 2016 I'm excited to see your door trims are Chestnut, the holy grail of GT6 interiors. But I agree with Gully the carpet bits on your cards should be vinyl. Sorry to hear about Rarebits. But Woollies do good trim. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now