Richard Lambert Posted September 19, 2018 Report Share Posted September 19, 2018 Hi Again Dose anyone know what this manifold is there are no marking on the manifold I'm looking to buy the rest of the exhaust system to my MK3 Spitfire with early MKIV engine Link to comment Share on other sites More sharing options...
Colin Lindsay Posted September 19, 2018 Report Share Posted September 19, 2018 The flanges appear identical to the current spitfire model sold by Rimmers; I've no idea who makes it for them but they're worth a try for the rest of the system. Link to comment Share on other sites More sharing options...
Mjit Posted September 19, 2018 Report Share Posted September 19, 2018 Could be a Moss/TriumphTune one too - https://www.moss-europe.co.uk/shop-by-model/triumph/spitfire/exhaust/exhaust-manifolds/moss-triumphtune-sports-extractor-manifolds.html Link to comment Share on other sites More sharing options...
Steve P Posted September 19, 2018 Report Share Posted September 19, 2018 Looks like a Pheonix one to me from the joints,Moss and Rimmer sell them. I had a 6 pot one on my Vitesse which was an awful fit,now removed as i was lucky enough to find an original MTP one. Steve Link to comment Share on other sites More sharing options...
Mjit Posted September 20, 2018 Report Share Posted September 20, 2018 Having recently had my 4-2-1-2 system apart to replace the prop. and taken the opportunity to replace the shackle type exhaust clamps with band type ones I think a 47-51mm clamp with JUST fit on the main pipe joints. Certainly it's a 43-47mm for the rear box/rear 'Y' joints and guessing the 40-43mm clamps were for the manifold down pipe/front 'Y' joints - which seem to have been welded up on Richard's unit. Link to comment Share on other sites More sharing options...
Mad4classics Posted September 20, 2018 Report Share Posted September 20, 2018 Might be from SC Parts. Only say this because tubes from cylinders 2&3 go under those from 1&4. Some are opposite in that 2&3 are outside as in picture from Rimmers above, but the SC Parts one matches your configuration. David Link to comment Share on other sites More sharing options...
rogerguzzi Posted September 20, 2018 Report Share Posted September 20, 2018 4 hours ago, Mad4classics said: Might be from SC Parts. Only say this because tubes from cylinders 2&3 go under those from 1&4. Some are opposite in that 2&3 are outside as in picture from Rimmers above, but the SC Parts one matches your configuration. David Hello All I have no idea who made it but I have one spare if anybody wants one?(for a reasonable price) It was only changed because the new inlet runners on the fuel injection fouled the 1 and 4 pipes. It is a much better one tha the one I fitted(thicker guage tube)so does not get so hot! I have had to lag the new one and it still smells hot! Roger Link to comment Share on other sites More sharing options...
thescrapman Posted September 24, 2018 Report Share Posted September 24, 2018 Phoenix system, collector gives it away. supplied by many traders now. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now