JohnD

Mea Culpa! But those are what the trade call "Paid Advertising Copy"! I always hope to find in the Courier interesting articles, so I look in the Contents page, and in this case the "Events" page, which although it includes Area events as far ahead as August, makes no mention of Malvern. The TSSC website "Events" page has miraculously been populated in the last 24 hours, and does mention the Inter-Club International at Malvern, but along with nine other parochial Area events! And when you click on that entry the details are, inexplicably, projected on a background of the pits at the old Rheims-Gueux circuit in France! Why isn't the TSSC making more of the biggest Triumph AND other classics show of the year? John PS I'm nothing to do with the event organisers, who for historical reasons probably wouldn't want me anyway. PPS The Three Counties Showground at Malvern, has an excellent camp site attached! I recommend it for anyone who likes to camp or camper van! https://www.threecounties.co.uk/news/three-counties-campsite-opens-26-april-2021/

Unless it's distortion in the camera, that bracket is deffo bent! Has the weld failed on the rear side? In the circumstances, a hammer might be used to 'adjust' it, and bring the radius arm back into alignment. For your welder's information, Canley's has the correct dimensions for the bracket location: Rotoflex Chassis Dimensions : Canley Classics John

Thanks, Spitfire4! Looks like they are the same holes! Wish I'd thought of three holes in one! Would have made the comparison easier. Which do you use?

Three mounting holes! Wow! I did that in about 1996, when I was re-building Old Blue Vitesse. An article from long, long ago when the Courier was called "Turning Circle" described in engineering detail the nature of the Rotaflex suspension, and how it might be improved. The author ( C.K.Eikhoff - his article was "Rear Suspension Talk" Turning Circle No.14, Feb '89, pp. 9-15) found that lowering the wishbone pivot point by 60mm (2.4"!) would minimise camber change and reduce Rotaflex plunge, while a lesser drop of 44mm (1.7") would abolish plunge. As I was fitting Rotaflex to a previously swing-axled car, I made three sets of wishbone brackets, to match the OE dimensions, those of Eickhoff's 60mm drop (Eikhoff 'B') and another set, used by other racers which dropped the eye only 1" but also pushed it out by 5mm: As you will note, they were designed to be BOLTED, not welded to the chassis rail so that I might compare and contrast each set. I regret, for my scientific reputation that I tried out the "Racing" brackets and was so impressed that I never tried Eickhoffs! Has anyone used the triply drilled Canley brackets? What are the dimensions of the three holes locations? If only I'd patented my designs, I could sue Canleys!! And, has anyone heard of Eickhoff ever since? JOhn

WoW! Yes it is! Thank you, Pete! So, why wasn't there a proper link in Facebook, or a mention in the Courier? A simple (!?) https://www.tssc.org.uk/tssc/uploaded_files/A4 TSSC Tax Disc 2024.pdf would have been much more useful! But, Pete, if the TSSC had really "spent years getting rid of road tax" then your reply might make sense. These are "classic" cars from the "Classic" car age, when we all had to display something, even if it was Guinness bottle label. Surely the originality people will love having a original looking disc on their windscreen. The alternative as a small rectangular sticker is neither original nor imaginative! John

I posted the above two months ago, when the TRR announced that the International 2024, would be "Inter-Cub", to which all UK classic car clubs are invited, and already many clubs have shown their interest in such a forward-thinking and cooperative event. It will be at the gorgeous Malvern Show Ground on June 28th to the 30th. Note that date in your diaries! I looked forward to seeing a notice, here on the TSSC website or in the Courier, but December went by, my January copy arrived today and there is no mention of an "Inter-Club International" . Surely all Triumpheroes will want be there, so that TSSC members will be disappointed if they aren't? I have no idea why the TSSC seems to reluctant to publicise it - please TSSC, tell all your members! Or tell us why not. John

Must be getting slow, took me ages to work out OTAZEL!

It used be that the terminals of each battery cell were exposed on top. Even easier to check the cells with a volt meter! But thats progress for you. John

AidanT, If you possibly can engine and gearbox together. Yu need a "Load Leveller" on your hoist and a high enough lifting point. Here's how, on my Vitesse. Note contrary to the WSM advice you do NOT need to take off the bonnet!

Some covrs do, some don't, nonidea of the logic. The pot scourer inside is often clogged with black gunge, best levered out and thrown away. Replace with wire wool if you must.

Start by removing the silencer. Then, moving forward, the exhaust pipe. THEN, the manifold. Good luck! John

Mine's hardwired. And powered from the van, so never runs out of battery.

Sorry! WHO is "Heidi Klum"? What she?

Whom is "Heidi Klum"?

Thank you Roger! A most ingenious method! I will retain that in long term memory, just in case! John PS. I notice several welding spatter marks in the number 2 & 3 bores, but you will be doing a hone, if not a rebore, so no matter. But worth covering the block face when doing this job? J.

I don't think you need a 'remote' camera. On the TRansit, my rear view cameras are mounted on the back of the van, one pointing down, one back. The latter provides the 'rear view mirror' and simplifies backing. Yes, I suppose that like a reversing sensor, one on the trailer could ward against hitting the wall behind, but keeping the trailer straight when going backwards is a bigger task!

Colin, that's where a rear view camera is useful.

Yes the plug needsvto be peened over. You know using that rounded end of your hammer that never seems to have a use!

Talk to Rimmers. OR Mark Field, I think he has some, also for either end of the main oil gallery. That deserves being opened and then drilled out, but you need to press out the oil pump drive Bush to do that, and buy a really long drill, with parabolic flutes. I don't know how Triumph produced that, it's full of little projections as if it was CAST rather than drilled! Block dip - good idea! But once comes out of the final wash it will be so clean that it could flash rust. Get it home ASAP and give it the WD40 treatment John

Wet suit material, if unlined, is "open cell", it allows the material to fill with water, so will hold water next to your paint all the time. Better go for "closed cell" rubber. But I use solid rubber sheet. John

No, Colin, don't be biased. Until very recently most of the faces on TV and the 'Net have been white. That's what recognition software trains on.

Now THERE is a very good point (steering AIs). But who has hold of the tiller? Humans! Even in America (don't know about UK) face recognition is biased towards white faces, because it's those that appear on the 'Net. Bias perpetuates bias.

Early TV sets had a thick cover over the front of the CRT that was lead glass - they emitted X-rays! But what's your quibble? Household use of guns? In the US, there are 1.2 guns in legal ownership for every American. So they are certainly, in some societies, a household factor. The criminal.use of guns is a different matter, in every country.

Steve, Dismantle and rough/clean the surfaces, as before. Then grease them where they contact each other with a "conductive grease" ( https://www.amazon.co.uk/s?k=conductive+grease&adgrpid=52839051826&hvadid=259032990207&hvdev=c&hvlocphy=1006854&hvnetw=g&hvqmt=e&hvrand=13151397456398697064&hvtargid=kwd-306759865908&hydadcr=4398_1795150&tag=googhydr-21&ref=pd_sl_89mdcd6149_e ) Other suppliers are available. Reassemble, and then grease over them with Vaseline. Include the battery terminal. That should provide the best protection and conduction that you can. BUT! That you need to do this repeatedly makes me wonder (I don't know the Astra) if the junction box is getting a lot of road spray. Work out where it's coming from, and make up some sort of under bonnet deflector, to keep it away. You might ask on an Astra Owners website if anyone else has this problem: https://www.astraownersnetwork.co.uk/ John

It supposed to that, Pete! Find a sky diver video online. Lots of them wear cameras that show a view apparently from two metres above their head. No idea how, but it's "routine"!