I think the following will fit , the hose is 23 cms long . I preferred a solid brake pipe . It’s surplus to me so if you want it it it would cost you just P & P
Paul
nb the brake hose is NOS
To secure the bleed nipple I used a P Clip bolted to the valance like the ones below , though check the size
https://www.ebay.co.uk/itm/10X-Marine-Grade-Stainless-Steel-Rubber-Lined-P-Clip-8Mm-Hose-Pipe-Clamp-M6-Hole-/362999895620?
Paul
https://www.ebay.co.uk/itm/TRIUMPH-804507-HERALD-1200-ESTATE-REAR-FLOORBOARD-ASSEMBLY-SHOP-SOILED-/115184810124?mkcid=16&mkevt=1&_trksid=p2349624.m46890.l6249&mkrid=710-127635-2958-0
Rear Floorboard
Paul
I used this tape on the harness of my Vitesse , it’s non adhesive , makes for a good finish
https://www.autoelectricsupplies.co.uk/product/348/category/68
Paul
This is where I put my relays on my Vitesse also wired up so all 4 lights operate on dip as well as main beam . For MOT purposes there’s an inline fuse which can be removed reverting to 2 lights on dip
Paul
The current situation is that I can return at no cost . They stand me at £35 . The condition is very good as no cracks in the wood . If anybody is interested pm me asap as currently told the seller I’m returning and they are parcelled to go
Paul
This is the item description
Triumph Vitesse / Herald Wooden Door Capping. ( Saloon Rear)
Wood is in really nice condition. Just requiring a gentle sanding and coat of varnish
Length: Top edge is 495mm Bottom edge is 460mm
Width: 70mm
No mods at all it’s just a short version of the existing down to the telltale writing on the back . That’s why I thought it was for the convertible . It has to be Triumph / BL . We may never know . The Ebay seller who was selling other Triumph items hasn’t offered any further explanation and has agreed for a return
Paul
Purchased a 2017 plate Tucson last April , it has a full size alloy spare , wasn’t expecting that . However , a recent MOT highlighted the tyres had started to split at 14,000 miles . This was advisory and will be changed
Paul