Jump to content

martyn wright

TSSC Member
 View Profile  See their activity

  • Posts

    652

  • Joined

  • Last visited

  • Days Won

    2

 Content Type 

Everything posted by martyn wright

  1. martyn wright
    Yes! The problem was that the photo in the Triumph Workshop Manual shows in the picture at the Dynamo end, with the HT leads starting at No1 thro to No6 and in the Owners Handbook the HT leads next to the Dynamo starts at No6 and this threw me a little! Anyway I had the right sequence! but the starter motor is a little slow and the engine would not turn over fully? I then found a small leak at the Adjusting Screw under the Stromberg Carb.
  2. martyn wright
    Thank You All!
  3. martyn wright
    Hi! The Vitesse 6 Owners manual shows a Firing Number layout different to the Vitesse Workshop Manual? Can someone send me the correct sequence please? I am working on the car know!! Cheers martyn
  4. martyn wright
    The Seatbelt were a Dealership Extra on mine! "Colin" can you give me an estimate on what you paid for the ones in the photo? Kind regards Martyn
  5. martyn wright
    Hi Doug! Thanks! I think that was my tread? 6-10 months ago? I missed a set on ebay!
  6. martyn wright
    Thanks John! But I am looking for the original grey if they are out there? Could even be my old ones around??? Martyn
  7. martyn wright
    Hi All! I am looking for a set of front Convertible Static Seat Belts? Pic Attached! These were also missing from the cars trip to Hereford for Restoration!
  8. martyn wright
    Hi All I drove a couple of these back in the 70s, we had them in Germany!
  9. martyn wright
    Hi All! Emma has sent me a Diagram of a "Organ Pedal" from one of their 1600/6s
  10. martyn wright
    OKay! I got the first Name wrong!!
  11. martyn wright
    Thanks All! Mick Doig has one and I have pre ordered it! Kind Regards Martyn
  12. martyn wright
    Hi All, Can anyone tell me which of the 3 Accellerator pedals is the correct one for my 1600/6 ( I think its the middle one as the Clip that fits over the rod is missing??) I have never seen one so! Many Thanks Martyn
  13. martyn wright
    Hi Steve Have you a photo of the pedal? If you go onto "Canley Classics" there will be a Diagram and part number for your vehicle!
  14. martyn wright
    Hi! I new Stan Walters! When I purchased my 1600/6 which I found in a Barn on top of Totnes mountain, back in 1998, I purchased a brand new chassis and a few other bits from him! He also gave me a Signed "Practical Classics Book. He then moved to Spain a couple of years after that.
  15. martyn wright
    Sufferin Sucatash!
  16. martyn wright
    I have logged out and back in but now on 23 hours since last message??
  17. martyn wright
    Hi! Is it me or is the Browser Function not updating? The last entry I have is 21 Hours ago??
  18. martyn wright
    Hi! Theres a New Old Stock one on Ebay £20!
  19. martyn wright
    Hi All! I am looking for a "Rod Type" Accelerator Pedal and "Rear Clip"? The pedal was taken out on restoration of the bodywork and not returned with the car! Parts 18 (Clip is not shown) on Canley Classic 2nd Diagram (Below)
  20. martyn wright
  21. martyn wright
    Hi Pete! I looked into this last year, thinking I was missing the bolt? I was unable to find a code No for the said bolt! I thought it was the pivot bolt on the 13/60 Hood Diagram(Pt No41)- Canley Classics! but found that it was not in the end? You might have to drill it out and as you said "Weld one in"?
  22. martyn wright
    Hi Colin! On my Convertable, I have one on the Tank side and one on the passenger side? Maybe it is because of the Scuttle movement??
  23. martyn wright
    Hi Colin! I have just had a look at my Vitesse 1600/6. On the bottom I have just the "Rivet" sticking out and on the top have a Rivet & a small piece of bent over metal which looks like you would slot in a thin panel and it would be held in place? Cheers Martyn
  24. martyn wright
    Hi! I had the same problem on my 1600/6 Vitesse? I ended up cleaning out the Bleed Nipple(see Pics)! and fitting new Bleed Nipples(Canleys) Cheers martyn
  25. martyn wright
    Apparently the Mk1 2L came in Sept 66, without the "6" Badge" and are the seat belt fittings correct?
×
×
  • Create New...