avivalasvegas
Forum User-
Posts
318 -
Joined
-
Last visited
Content Type
Profiles
Forums
Blogs
Gallery
Downloads
Store
Events
Everything posted by avivalasvegas
-
Just wanted thank you for this post - I have ordered a pair of 21/979/1 couplings from Robush (They didn't know which couplings in their catalogue fit the GT6 MK 2) so I relied on the information you shared here to get the right ones. At < £200 for a pair of genuine Metalastik couplings, I question the sense in CV conversions or Chinese copies for anyone who owns these cars
-
Thanks for that link - I've got the form.
-
Just tried downloading this form and received an error message. I've just send an email to the above.
-
Greetings All, After replacing the GT6's previously leaking Clutch Master and Slave cylinders with new old stock Girling units from Dave @ LongBridgeLtd, we sprung a leak again. Turns out Dave's "newly replaced" seals weren't new after all. We've repainted the bulkhead now and installed new seals - the leaks have yet to reappear. That said, the clutch pedal is quite squeaky and has alot less travel distance than any car I've driven. No air in the system, seal and fluid is new. Any thoughts on what else I may have missed or have to do next?
-
I have continental 13" and absolutely love them!
-
It would appear that responsible consumerism is making a comeback! Count me in!
-
Wouldn't be the first time. There are more pragmatic options out there
-
Greetings! I recently came across this reproduction Delco electronic distributor with mechanical tachometer takeoff, from Spitbits. I had previously decided not to go for the 123 unit because of mixed reviews and the headache involved in converting the tachometer to electric. I was also told (by my rolling road tuner) that the 123s don't work consistently well across all Classics, which was another red flag. The car is equipped with a Lucas 22D6 with Magnetronic ignition - I am hoping for a fit and forget replacement. https://www.spitbits.com/store/1a-COMPLETE-ELECTRONIC-DISTRIBUTOR-GT6-P6984.aspx Anyone with experience with this actual unit installed on your car? Cheers!
-
Don't do it! I had a Chinese aluminum rad fitted on my Classic Mercedes. The weld bend at the bottom hose connector failed. The results were disastrous. Fortunately, I caught it before the motor overheated. It can be painful paying for a non-Chinese unit but I highly recommend going with products made with an element of manufacturing ethics involved. Basically anything Japanese/ German is preferred (if a recore isn't an option)
-
Anyone know what the X in W78X stands for? It took me a long time to find a full set of W78 plugs. The last two are currently on their way from Italy. I really hope they live up the forum's hype
-
Highest capacity + best warranty battery for the GT6?
avivalasvegas replied to avivalasvegas's topic in General
-
Anyone use “the flying Dutchman’s” 6 impeller water pump?
avivalasvegas replied to avivalasvegas's topic in Cooling System
This appears to correlate with the experience of other owners who have installed the updated water pump. It appears to force coolant through the system better regardless of other variables. -
Anyone use “the flying Dutchman’s” 6 impeller water pump?
avivalasvegas replied to avivalasvegas's topic in Cooling System
Further complicated by the fact that this engine was extensively rebuilt 35K miles ago with some really unorthodox decision making. {Drives great though 🙂} I have almost completed my Auto-Rx oil treatment. This additive is known to gently (slowly) unblock oil pathways, dissolve sludge and rejuvenating rubber seals. It has worked wonders of my cars over the past 15 years. If there was a block oil passage, I’m highly confident that will have been resolved. For the coolant, my Mercedes Benz cars systems were descaled and flushed using Citric Acid. Has anyone tried this on a Triumph? -
Anyone use “the flying Dutchman’s” 6 impeller water pump?
avivalasvegas replied to avivalasvegas's topic in Cooling System
I would be happy as well. However, the aux fan kicks in at the 5/8 mark and prevents an additional increase in temperature. I must admit I cannot explain why the temperature rises with 70mph airflow. -
Anyone use “the flying Dutchman’s” 6 impeller water pump?
avivalasvegas replied to avivalasvegas's topic in Cooling System
The fan kicks in at around the 5/8 mark. The previous owner clearly invested a lot in his cooling system. The Smiths gauge even has a concealed green LED to indicate Aux cooling has been triggered. Haven’t checked the sender yet - definitely top hose. -
Anyone use “the flying Dutchman’s” 6 impeller water pump?
avivalasvegas replied to avivalasvegas's topic in Cooling System
My apologies - we did run new coolant through earlier this year. It came out quite clear. No rust or sludge was visible. The aux fan definitely kicks in at high speed, as the temperature gauge does move above the halfway mark, even in colder weather. This only happens in London bumper to bumper traffic otherwise. Sounds like I’ll need to chose between a radiator recore or a new Radtech aluminum rad. https://www.radtec.co.uk/shop/radiators/gt6-radiator/ -
Anyone use “the flying Dutchman’s” 6 impeller water pump?
avivalasvegas replied to avivalasvegas's topic in Cooling System
This one? Yes, the electric fan kicks in in London traffic & above 60 mph. Otherwise it is rarely activated. -
If you think that's high, take a look at this one. Based on recent sale prices, cared for Mk2 examples have crossed well into the £25K+ range, so a MK1 should command upwards of £20K. Given how scare they are, I wouldn't be surprised if these prices continued to rise just as rapidly.
-
https://youtu.be/ZICIsdz7W0A Incredibly eye opening reminder about why one should never compromise on Tyre brands!
-
I'm too late. I've just installed 13" Continental Eco Contact 6 tyres on my GT6 and find them to be the best tyre I've used. Low rolling resistance, low noise and never once loses grip. That they are available for budget tyre prices is a bit surreal!
-
Highest capacity + best warranty battery for the GT6?
avivalasvegas replied to avivalasvegas's topic in General
New battery installed. Much to my surprise the car starts noticeably quicker with fewer turns. Amazing! -
New PLC seat foams are here....now what do I do?!
avivalasvegas replied to avivalasvegas's topic in Bodywork & Fittings
Thanks for the encouragement - Worth a shot I suppose but will start with the passenger side first just incase. Now, to search for "How to take the seat out of the car" 🙆♂️ -
I may have overestimated my ability to handle this job on my own. I have the Spitfire 1500 reclining seats installed. It's clear I will need to: 1) Lightly rust "convert" the seat frame which is otherwise is good shape. 2) Follow the instructions I'm tempted to hire a trim guy to install everything for me but before I do, thought I'd check to see if any novice had attempted this job before?
-
Still looking for one..