foshi
-
Posts
255 -
Joined
-
Last visited
Content Type
Profiles
Forums
Blogs
Gallery
Downloads
Store
Events
Everything posted by foshi
-
no overdrive herald uprated diff, the vitesse engine sounds better but herald more fun to drive .
-
yes but the herald has vitesse trim wood capping dash and bumper trims so not sure which one to part with paul
-
having both a 1600 vitesse and a herald with 1500 engine the herald seems more lively but with out the same exhaust note , not sure hich one i prefer opinions
-
first thing to do is check you have a spark wont start with out that at the dist plugs paul
-
properly nothing i have pulled a lot of boxes in my time found all sorts, nuts washers in the bellhousing .
-
when you say wont start is it trying to fire , if not good spark at points spark from points whilst turning the engine over ignition on , if yes move to carb spray east start or pour some petrol into carb does the engine now try to start? have you checked the king lead from coil to dist is ok, its got to be something simple
-
done that yesterday with dot 4 , only painted the bulkhead area a short while back poured water over it but too late ruined .
-
so when you spray the easy start in do you have it on full choke . if it fires you have a fuel problem could be a weak pump. spilt diaphragm . could try gravity feeding the petrol just to eliminate blockages
-
if been left a long while your correct had that same problem paul
-
will run on easy start enough to prime the carb though
-
probably choke problem if it fires on easy start , mine took a bit of starting today needed full choke for around 10 mlnutes if tried to push in a bit would cough splutter, mind you minus 1 in farnham surrey .
-
i would pull the choke on manually at the carbs while someone starts it for you, see how that goes could also be a weak mixture damp on leads cap for starters .
-
properly is gte then thanks paul
-
sounds more like a carb problem to me , is it just cold days or damp days
-
have 2 sets only broken herald spitfire and a scimitar GTE could be from that ?
-
clearing out shed found in with some spitfire parts can't think where they fit now . last spitfire 10 years ago help please
-
correct pete will find the problem on mine when i swop the gearbox works for now though
-
thought he was only doing the spare parts now with his daughter
-
no of the slave cylinder so could move it forward more. not saying it is the correct thing to do but sorted mine out , before would grate trying to engage gear the pedal now seems firmer. was a new slave and master cylinder well blead, worth a go
-
can try them thanks clive
-
have tried ebay sellers sent reg only one has come back saying 2 week wait. waiting on price
-
Anyone know where i can purchase a centre propshaft bearing for my hiace van . no local factors can help toyota have just quoted me £248 +vat seems i have the changeover model REG LS57JPO , seems a lot of money for bearing and carrier paul
-
i do building maintenance for a car body repair shop in surrey , they have just completed work on a mga came bare metal they carried out some body repairs total respray great job better than new. i asked what it had cost the owner told will have no change from 10k
-
had the same on mine ground a bit of the slave pushed it forward clamped up has worked fine since , no idea why it was a after market part slave cylinder . could have been that ?
-
well i had fords vauxhalls back then . cortina that would not start cold mornings vauxhall viva that rusted away , they had faults fond memories for me .
