Jump to content

Paul H

TSSC Member
  • Posts

    3,122
  • Joined

  • Last visited

  • Days Won

    27

Everything posted by Paul H

  1. A window clip holder , used an old thin bladed carving knife . I heated the tip to cherry red , reformed the tip to fit the window clip then hardened by quenching with water . Paul
  2. Saw this from Car Builder Solutions , hose takeoff bleed kit https://www.carbuilder.com/uk/hose-take-off-bleed-kit?goal=0_7086c93f3b-952c7e1922-95355949&mc_cid=952c7e1922&mc_eid=efca095db4 Might be a solution for engines with a history of air locks Paul
  3. I’ve had a Cetek for close to 12 years now . Originally purchased to maintain 2 x 110 amp batteries on our caravan . The Cetek rating was for charging 225 amps . Faultless and now with the caravan gone enjoying retirement maintaining a Vitesse battery Paul
  4. From the Internet https://www.lotus7.club/forum/techtalk/mintex-1144-pads-road-legal Paul
  5. Each pad is marked Paul
  6. The Mintex 1144 brake pads arrived today . Will I be breaking the law 😱😱 Paul
  7. I did exactly the same on my Mk2 Vitesse, and no issues Paul
  8. Are the attached wires earth wires Paul
  9. Seen on Gumtree , seller based in Grimsby https://www.gumtree.com/p/cars-vans-motorbikes/triumph-spitfireherald-1300-gearbox/1388907146? Paul
  10. Re bedding in and the cooling . Is this after each test or series of tests ? Paul
  11. My Vitesse has never seen 90 mph 😱😱😱😱 Paul
  12. Thanks Clive , purchase made and 1 left now with this seller . Confirming the £45 ones have been sold . Big saving on Club price at £72 plus postage Paul
  13. Are these Mintex 1144’s suitable for my Vitesse mk2 ? Driving style is touring https://www.ebay.co.uk/itm/Mintex-Racing-MGB633-M1144-High-Performance-Brake-Pads/282682544232? Understand the location holes might need drilling Thanks in advance Paul
  14. https://www.antasie.co.uk/products/solution-welding-flux-cored-rods?variant=32320943784020 Paul
  15. I successfully blew the unit due to incorrect wiring , explained what id done to Accuspark and they supplied another unit at a discounted price . The only way I found I had blown the unit was to go back to points Paul
  16. If you wire up the Accuspark incorrectly and start the engine the unit will blow . How do I know 😱😱😱 Paul
  17. Suggest clearing as much as the area as possible and overspray with Dynax . From my discussions with Bilthamber you can Dynax all the underseal Paul
  18. Another vote for Bilthamber products Paul
  19. Saw this on Gumtree . https://www.gumtree.com/p/cars-vans-motorbikes/1970-triumph-herald-1360-estate-probably-the-best/1390966973?utm_campaign=socialbuttons&utm_campaign=socialbuttons&utm_content=app_ios&utm_medium=social&utm_source=ios_social Paul
  20. Here’s a set I’ve got but haven’t used them yet . Amazon about £23. Plan is for rear UJs on my rotoflex Vitesse Paul
  21. Check out this link At the bottom of the post is what I used for my Vitesse . Amazon link in the post still works and costs £4.20 Paul
  22. Looking on flea bay there are pu type covers for £5 to £9 . This leather cover looks period though more expensive https://www.ebay.co.uk/itm/FOR-TRIUMPH-VITESSE-BLACK-TOP-QUALITY-ITALIAN-LEATHER-STEERING-WHEEL-COVER-NEW/260882585746? Paul
  23. Any chance of a pic of how the leather covering looks on the steering wheel for the Vitesse mk2 ? Paul
  24. This wheel came with spares for my Vitesse mk2 which from the above should have been leather covered ? If so can you still buy the covering Paul
×
×
  • Create New...