PeteH Posted June 24, 2021 Report Share Posted June 24, 2021 57 minutes ago, Jeffds1360 said: It's illegal in the USA. Well, haggis is. Genuine Scots Imported Haggis, was. But there are rumoured to be "Haggis Smugglers" who run them from Canada. (allegedly). My Son, who lives in Texas, and is married to a Scot. Never seems to have an issue getting Haggis for Burns Night?. It is however, definitely an "aquired taste". Neaps and Tatties is part of the comestible acompaniment. Maybe returning Scot`s hide them under their Kilt?.🤣 Pete Link to comment Share on other sites More sharing options...
Dick Twitchen Posted June 24, 2021 Report Share Posted June 24, 2021 Haggis and Neaps on the menu once a week in the destroyer HMS GLASGOW, like it or not but they always ran out. Dick 1 Link to comment Share on other sites More sharing options...
Badwolf Posted June 24, 2021 Report Share Posted June 24, 2021 1 hour ago, Jeffds1360 said: It's illegal in the USA. Well, haggis is. Please don't tell him!! Sorry Hag. Link to comment Share on other sites More sharing options...
Colin Lindsay Posted June 25, 2021 Report Share Posted June 25, 2021 My local hospital has a Burns Unit, I went in once and none of them knew even a word of his poetry. Link to comment Share on other sites More sharing options...
Chris A Posted June 25, 2021 Report Share Posted June 25, 2021 2 hours ago, Colin Lindsay said: My local hospital has a Burns Unit, I went in once and none of them knew even a word of his poetry. That is better than your last posting in the Joke section ! 😉 Link to comment Share on other sites More sharing options...
Jeffds1360 Posted June 25, 2021 Author Report Share Posted June 25, 2021 Aahhh.! I thought I had hit the wrong link Thought it was a bit odd....... in my seat repair section ! Nobody did answer the question as to if the top 1/3 of the foam is a separate (and by its disintegration) section Link to comment Share on other sites More sharing options...
Chris A Posted June 25, 2021 Report Share Posted June 25, 2021 17 minutes ago, Jeffds1360 said: Nobody did answer the question as to if the top 1/3 of the foam is a separate (and by its disintegration) section Don't know myself. 1/3? far more than was missing/disintegrated on mine. I added a piece at the top to protect/cover the top metal support/frame bar. Check out the seat foam kits offered by the usual suppliers and see if you can tell from their photos? Link to comment Share on other sites More sharing options...
Jeffds1360 Posted June 25, 2021 Author Report Share Posted June 25, 2021 Thanks Chris, all the pictures I have seen show a single piece of foam, curled over top of the back. Nothing like mine, with side pieces and only 2/3 the height of the back. ??? There is a cloth 'bag like' section at the top too. Nothing in it now so I assume it was full of a different spec. foam. Link to comment Share on other sites More sharing options...
Chris A Posted June 25, 2021 Report Share Posted June 25, 2021 Just had a look at R***** Bros and it looks to be a complete piece, maybe 2 glued together? to form an 'L' where the short piece goes over the top bar. Link to comment Share on other sites More sharing options...
Chris A Posted June 25, 2021 Report Share Posted June 25, 2021 1 minute ago, Jeffds1360 said: There is a cloth 'bag like' section at the top too. Nothing in it now so I assume it was full of a different spec. foam. Bag? mine has/had a piece of fabric that I thought might just be to help pull the foam into place. The fabric is so rotten, ripped, coming off I can't be sure. Mine also have side pieces, they are needed as the seat cover is shaped not flat. Could it be you are getting a mix of photos of earlier Herald seats/foams and 13/60 ones? Link to comment Share on other sites More sharing options...
Pete Lewis Posted June 25, 2021 Report Share Posted June 25, 2021 most seat design with a need for the contour to be pulled used a stiched in cloth panel so it pulls through the framing and gives the seat squabs the shape to hold your bum in place or the relief for the back rest Pete Link to comment Share on other sites More sharing options...
Jeffds1360 Posted June 25, 2021 Author Report Share Posted June 25, 2021 That's interesting. I know what to do with the back flap now Link to comment Share on other sites More sharing options...
Pete Lewis Posted June 25, 2021 Report Share Posted June 25, 2021 yes pull it in and clip it down pete 1 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now