Nick Jones Posted May 16, 2021 Report Share Posted May 16, 2021 10 hours ago, Dave the tram said: Especially the dirty diesel Passat at over 300k. It's an older A6 with the straight 5 diesel also used in transporter vans and Volvo 850 / V70. Legendarily long-lived engines - supposedly capable of 500k without major attention if kept serviced. I've changed injector nozzles and it could do with a turbo now, but otherwise just service items. Not sure the rest of car can manage another 150k though. The 1.9TDI and 1.9TDI PD engines are nearly as tough (PDs MUST have the right oil though), the 2.0 not so much, though it does depend exactly which one you have. Some of the 2.0 TDIs have issues with their balancer shafts and oil pump drive (oil pump drive is an 8mm hex, which only drives on the points of the hex...... what could possibly go wrong?). If the oil pump light comes on on these - it means it! Ref your pulley, ISTR that the pulley has a pip on it that drops into the little slot in the spacer-nut thingy. This should get the pulley sitting true but may not help tightening things up. You may have to put a reasonably chunky screwdriver though the fan & hole in the front of the casing to engage in a slot in the rotor. Just make sure you keep the screwdriver away from the copper windings in both the body and those in the core of the rotor. The 2L Triumph sixes die slow - an outright mechanical failure without advance warning is unlikely. Nick Link to comment Share on other sites More sharing options...
Chris A Posted May 17, 2021 Report Share Posted May 17, 2021 18 hours ago, clive said: https://www.minisport.com/20psi-oil-pressure-switch-mini.html is just one, but google is your friend. Plenty available, probably a range of pressures too. I am tempted to fit one (it is on the shelf) but use a T and have the 20psi one connected to a super bright LED that will be far more obvious if pressure drops than a gauge. there are even adjustable switches available should you wish to experient https://www.med-engineering.co.uk/oil-pressure-switch or demon tweaks has both https://www.demon-tweeks.com/uk/longacre-universal-low-oil-pressure-switch-346246/ Ok, so I've been looking at what is available her in France. Still reluctant to order from UK due to unclear position with courriers charging the earth for 'customs clearance'. I've got a lead on a possible one the thread is NPTF rather than NPT, looking them up I think it would be ok can anyone confirm this thanks. Link to comment Share on other sites More sharing options...
Clive Posted May 17, 2021 Report Share Posted May 17, 2021 39 minutes ago, Chris A said: Ok, so I've been looking at what is available her in France. Still reluctant to order from UK due to unclear position with courriers charging the earth for 'customs clearance'. I've got a lead on a possible one the thread is NPTF rather than NPT, looking them up I think it would be ok can anyone confirm this thanks. Google suggests they will screw together, but a sealant may be wise. A few turns of PTFE tape should suffice. Link to comment Share on other sites More sharing options...
Chris A Posted May 17, 2021 Report Share Posted May 17, 2021 7 minutes ago, clive said: Google suggests they will screw together, but a sealant may be wise. A few turns of PTFE tape should suffice. Hummm... I think I'll put the idea on the back burner for the moment. i don't need to change the switch, just filling in time as the weather is 'merde' Link to comment Share on other sites More sharing options...
daverclasper Posted May 17, 2021 Report Share Posted May 17, 2021 (edited) 19 hours ago, Nick Jones said: The 2L Triumph sixes die slow - an outright mechanical failure without advance warning is unlikely. Just wondering how slow Nick?. Had a noise for the past 2000 miles that I'm hoping isn't crank bearings (fairly quiet and not got any worse over these miles). Car not driven hard though. More noisy with a cold engine. Have explored the other possibilities of the noise I've been advised on, though not found anything to suggest it may be these. A bit of a how long is a piece of string scenario I guess, though any suggestions great. Cheers, Dave Edited May 17, 2021 by daverclasper Link to comment Share on other sites More sharing options...
Pete Lewis Posted May 17, 2021 Report Share Posted May 17, 2021 how about turn the radio up loud Pete Link to comment Share on other sites More sharing options...
Nick Jones Posted May 17, 2021 Report Share Posted May 17, 2021 2 hours ago, daverclasper said: Have explored the other possibilities of the noise I've been advised on, though not found anything to suggest it may be these. Bit of piston slap is fairly common (no gudgeon pin offset) on well-used engines and will be worse when cold. Not a sign of impending doom. Its the rattle of dry big-ends on first start that I particularly dislike, but even that isn’t the end provided it shuts up as soon as the oil light goes out. Link to comment Share on other sites More sharing options...
Dave the tram Posted May 17, 2021 Author Report Share Posted May 17, 2021 Pretty sure the noise at the front is the water pump (started new thread under ‘cooling’. ) I took Nicks suggestion a step further and made an emergency short fan belt just to the pump - noisy with, quiet without the belt, so hoping to get the water pump refurbed. As for the alternator pulley that fell apart, I now find that the smaller hexagonal part at the front of nut that seats into the pulley was cracked and falling apart and won’t go back together, so going for new alternator. As for Pete’s ‘turn the radio up’ - I’ve gone one better. Although I like to keep my car fairly traditional, I have taken the radio out and replaced it with a panel of USBs and a 12v socket. I have a phone clamp on the dash and lovely blue tooth Apple AirPod pro earphones. These fit in the ear and have a noise cancelling function that makes the car sound like a modern luxury car while I’m still able to hear horns and sirens. (I also keep adding more and more sound deadening). Long motorway journeys are now very relaxing. I set the phone up with music and podcasts, google maps interjects through them as required and I can give a quick answer to any phone calls with one touch to the ear. I do still have a 1980s road atlas on the back seat though! Dave Link to comment Share on other sites More sharing options...
SpitFire6 Posted May 17, 2021 Report Share Posted May 17, 2021 On 15/05/2021 at 21:38, Pete Lewis said: the base triumph spec is 40 to 60psi at 2000rpm doesnt say hot or cold but safe to assume this is at running temperature front end noise check its not fan belt they can get very creaky basic oils can tire with long hot runs a higher quality with good ZZds work well and dont drop off when worked hard dont think the 60 will be of any improvement most Millers classic is used by many ive used valvoline VR1 in the Vitesse but club piston eze in the 2000 all very stable I do not believe that the levels of Ca or Zn have any influence on oil pressure. If that is what I thought you meant? I believe a lower group base oil at 20W50 will lose quality faster than a synthetic oil. Link to comment Share on other sites More sharing options...
johny Posted May 18, 2021 Report Share Posted May 18, 2021 I think oil dilution by contamination with unburnt fuel plays a part in loss of viscosity and as far as I know the effect is the same whatever oil is used. Probably the only solutions are having the engine in as good a condition as possible and changing the oil earlier. It would be an interesting experiment to see if changing a cheap half price oil twice as often as an expensive one would result in a better final oil pressure.... Link to comment Share on other sites More sharing options...
rlubikey Posted May 19, 2021 Report Share Posted May 19, 2021 On 17/05/2021 at 11:57, Chris A said: I've got a lead on a possible one the thread is NPTF rather than NPT, looking them up I think it would be ok can anyone confirm this thanks. Chris, I think you'll find NPTF simply means NPT-Female. NPT is of course National Pipe Thread, an American standard which is a taper thread. There is only one NPT thread - no variations, unlike UNified-Coarse & -Fine threads. Cheers, Richard Link to comment Share on other sites More sharing options...
Chris A Posted May 19, 2021 Report Share Posted May 19, 2021 Thanks Richard Link to comment Share on other sites More sharing options...
avivalasvegas Posted May 28, 2021 Report Share Posted May 28, 2021 I've had great success bringing what I thought were worn engines back from the brink using Auto-Rx, a solvent free, slow acting metal cleaner added to engine oil. 3K miles then a oil/ filter change and then 3K miles later, increased compression. As long as metal isn't worn, ARX will work. Then, I switch to Liqui Moly MOS2 20W50 oil. Worked like a charm on every classic! Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now