68vitesse Posted October 3, 2021 Report Share Posted October 3, 2021 Been trying to convince myself to buy an ultrasonic cleaner, either 6 or 10 Litre, any thoughts from those who have used them. Looked at quite a few YouTube videos which would suggest the larger one, with putting item in sealed plastic bag or pot with the cleaning solution so as not to contaminate the tank. Regards Paul Link to comment Share on other sites More sharing options...
JohnD Posted October 3, 2021 Report Share Posted October 3, 2021 I have a very small one, it's for spectacles or dentures. Used for those, or for small parts, and it is dramatically effective! Dirt swirls out of the finest seam. I just fill it with warm water with a dash of washing up detergent. If you have followed Project Binky, they used a big one for internal engine parts and the gear box, and those came up sparkling, so the technology works. It's the cost, and the low frequency of use that make me reluctant to buy a big one. JOhn 1 Link to comment Share on other sites More sharing options...
68vitesse Posted October 3, 2021 Author Report Share Posted October 3, 2021 2 hours ago, JohnD said: It's the cost, and the low frequency of use that make me reluctant to buy a big one. If I look at some tools I've bought, i.e Plasma cutter, I know what you mean. Thanks for the reply. Regards Paul Link to comment Share on other sites More sharing options...
ahebron Posted November 5, 2021 Report Share Posted November 5, 2021 The frequency of use of a tool has absolutely nothing to do with the need to purchase it in the first place. Personally I work on the theory if I need a tool once I will need it twice but at present I too have a plama cutter I have used once to cut out 6mm stainless steel spacers for the Vitesse body mounts. It always looks easy on Youtube! Link to comment Share on other sites More sharing options...
Ian Foster Posted November 5, 2021 Report Share Posted November 5, 2021 I have a small USC which I have used to clean up carburetor parts and I have also lent it to friends for the same purpose. With carb cleaning detergent, it does do a good job I would think 6L would be OK for most jobs. Ian Link to comment Share on other sites More sharing options...
Colin Lindsay Posted November 5, 2021 Report Share Posted November 5, 2021 2 hours ago, ahebron said: The frequency of use of a tool has absolutely nothing to do with the need to purchase it in the first place. I can list a Go-Pro camera, 8-track music recorder, sheet metal folder, air nibbler and probably many more plus a horrendously expensive music recording computer programme that I bought over the last few years, and have never used in anger. I just had to have them, the intention was there, but they never actually made it to the front line of usage yet... and it's amazing how quickly, after the 'must-have' purchase, that the realisation sets in... why? Link to comment Share on other sites More sharing options...
68vitesse Posted November 5, 2021 Author Report Share Posted November 5, 2021 57 minutes ago, Colin Lindsay said: that the realisation sets in... why? High dopamine?. I did buy a 10L ultrasonic cleaner, utube videos showed the use of zip lock bags and other containers with various solvents, including petrol, being used at same time. Regards Paul. Link to comment Share on other sites More sharing options...
Pete Lewis Posted November 5, 2021 Report Share Posted November 5, 2021 not got a ultrasonic tank ive always got by with a old bowl or oil can with the side opened out 5ltr tin of Jizer or Hyperclean and a brush well couple of years back a got a degreasing tank with pipe and pumped brush its useless even with un diluted concentrated cleaner that wont take the shine off a banana so there it sits completely un loved so its brake cleaner or chuck the solution away safely and get some Jizer reckon the clue is the supplied stuff is all friendly and useless at its job anything big can be a deterrent as stowage means getting out is a faf as its lack of use means its buried bit like the exercise bike you use to hang your shirts on syndrome Pete Link to comment Share on other sites More sharing options...
chrishawley Posted November 6, 2021 Report Share Posted November 6, 2021 I've got two ultrasonic cleaners and have used them regularly. The expensive professional Elma one from Cousins UK is superb and makes light work of cleaning small and complicated parts (e.g carb bits, cast brackets, piston) but no great advantage where larger parts (e.g. a timing chain cover) are concerned because brush /thinners/detergent is just as easy. Then I've got the little Micky Mouse USC - £30ish off interweb. Junk. Won't deal with anything serious. But an Elma machine would be £200 - £1000 at current prices. And BTW; Ever using volatile/inflammable solvents in a USC is Extremely Dangerous. A good USC will allow the tank to be heated to just short of 100C. That's roughly the same as boiling petrol in the kitchen kettle under the belief that nothing could possibly go wrong. Link to comment Share on other sites More sharing options...
Colin Lindsay Posted November 6, 2021 Report Share Posted November 6, 2021 30 minutes ago, chrishawley said: That's roughly the same as boiling petrol in the kitchen kettle under the belief that nothing could possibly go wrong. It does make the coffee taste funny, tho. Link to comment Share on other sites More sharing options...
dougbgt6 Posted November 6, 2021 Report Share Posted November 6, 2021 When I worked at British Airways we used ultrasonic baths to clean keyboard key tops. Check-in terminals were the worst, we used to call operatives chicken brains, happy days. My daughter had a contract with the jewellers who sold her her engagement and wedding rings, once a year they cleaned them for her in an an ultrasonic, they came out sparkling. It occurs to me an ideal present for the lady wife this Christmas, if I had one. Doug Link to comment Share on other sites More sharing options...
ahebron Posted November 6, 2021 Report Share Posted November 6, 2021 9 hours ago, Colin Lindsay said: It does make the coffee taste funny, tho. Coffee tastes funny anyway. Cup of tea every time any reason. Link to comment Share on other sites More sharing options...
ahebron Posted November 14, 2021 Report Share Posted November 14, 2021 Used my Ultrasonic cleaner to clean a pair of Amal concentrics we are fitting to a car. Already clean carbs came up cleaner still then I sprayed them with a spray of electrical cleaner and corrosion stopper spray as they started to corrode with white powder soon after removal. Cleaning fluid mix of simply green and water turned almost black. Link to comment Share on other sites More sharing options...
PeteH Posted November 14, 2021 Report Share Posted November 14, 2021 1 hour ago, ahebron said: Amal concentrics Blimey, that takes me back to my "motorcycle" days. Never known them used on Cars,? though I cannot see why not. Every day is a school day. Pete Link to comment Share on other sites More sharing options...
Ian Smith Posted March 20, 2022 Report Share Posted March 20, 2022 Hello folks, a bit late to the party (as usual ). For what it's worth, I've been looking on Youtube, about electrolytic cleaning. It looks really simple (like me) and is relatively inexpensive. I'm not sure it's Ok for hi-spec electronic gadgetry, but for things like chassis parts, it might do the job. A colleague has a similar set-up for the steam loco he's restoring, and results are very good. I just need a very long plastic box to retain the fluid. Any prior knowledge by the collective is, as usual, gratefully received. Cheers, Ian. Link to comment Share on other sites More sharing options...
Peter Truman Posted March 20, 2022 Report Share Posted March 20, 2022 On 06/11/2021 at 23:16, dougbgt6 said: My daughter had a contract with the jewellers who sold her her engagement and wedding rings, once a year they cleaned them for her in an an ultrasonic, they came out sparkling. It occurs to me an ideal present for the lady wife this Christmas, if I had one. Brought the wife one several years ago, her Jeweler warned her against overdoing the cleaning as the U/S cleaner could weaken the claws that hold the expensive part (jewel/diamond) so it would be vunerable to falling out!! So now I have to pay the Jeweler every two years to inspect the collection and declare their SAFE! that present is like anything I buy the kids comes with a life time guarantee even consumables. I use it to clean my expanding watch strap amazing how much dirt us classic car owners accumulate when working and cleaning our cars! Link to comment Share on other sites More sharing options...
ed.h Posted March 20, 2022 Report Share Posted March 20, 2022 I use one as a cleaning step before electroplating. I clean the parts well as i can with solvents and wire brushes or wheels then in the US tank it goes. When I hit the switch, I immediately see plumes of crud come from recesses and crevices. Ed Link to comment Share on other sites More sharing options...
PeteH Posted March 21, 2022 Report Share Posted March 21, 2022 This was Available recently in Aldi. No longer available online, but odd stores may still have them? OK for small parts?. https://www.aldi.co.uk/white-ultrasonic-jewellery-cleaner/p/712990573305601 Pete Link to comment Share on other sites More sharing options...
ahebron Posted March 21, 2022 Report Share Posted March 21, 2022 My one is an ex dental one that I bought off a local online auction site. It was made in the UK and when the transducers cracked I got in touch with the manufacturer but they never bothered replying. I replaced the one disc transducer with a pair of cones and a new driver from Aliexpress. It works fine and having no timer means it can run for hours if needed. Transducers will crack if the items being cleaned are put directly into the cleaner not in the supplied basket Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now